JLG TF6-42 Service Manual Manuale d'uso
Pagina 859
Advertising
T12000 ID
04/99
10-78
Reassembly transmission
Figure 403
Position new transmission case to converter housing
gasket on transmission case. A light coat of grease
will hold gasket in position.
Figure 404
Install spacer plate assembly on transmission,
aligning clutch shaft with openings in
spacer plate.
Use caution as not to damage oil sealing rings.
Figure 405
Spacer plate must be tight against transmission case.
Do not
use bolts to pull spacer plate and case together.
Tap spacer plate into position at dowel pins.
Install spacer plate to transmission case capscrews.
Tighten capscrews to specified torque.
Figure 406
Position impeller hub gear on stator support.
Figure 407
Install pump idler gear bearing on idler shaft.
Figure 408
Install pump idler on bearing.
Advertising