JLG TF6-42 Service Manual Manuale d'uso
Pagina 562
Fit the distance piece (15) onto the pinion (16).
Lubricate the coupling surfaces and position brake support (14).
Check that the O-ring (17) is intact.
Apply Loctite 242 to the screws (13) and tighten using the criss-
cross method. Torque wrench setting: 34.2 ± 37.8 Nm
Lubricate the outer part of the seal (12) and insert it into the brake
support (14) using tool T27.
NOTE. Carefully check assembly direction.
Install parts in the following sequence: flange (10), O-ring (11) and
nut (9). Spread Loctite 242 on the threaded portion of the pinion
(16)
Fit tools T20A (or T20B), engage the stop rod and tighten the nut
(9). Torque wrench setting: 280 ± 310 Nm
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
160
ASSEMBLING THE INCOMING DRUM BRAKE - ASSEMBLAGGIO FRENO A TAMBURO IN ENTRATA - TROMMELBREMSE AM EINGANG
MONTIEREN - MONTAJE DEL FRENO DE TAMBOR EN ENTRADA - ASSEMBLAGE DU FREIN D'ENTREE A TAMBOUR
F1240560
15
16
F1240559
14
F1240561
13
F1240562
14
12
T27
F1240556
9
11
10
F1240563
9
(T20B)
T20A