JLG TF6-42 Service Manual - Manuale (Pagina 837)

T12000 ID 04/98 10-56
Disassembly dual modulated valve assembly
Figure 287
Remove regulator spool, spring, retainer spring and
spacer spring from housing sleeve.
Figure 284
Remove inner, middle and outer spring and stop pin
from modulation housing sleeve. Reference figure 47.
Figure 285
Remove accumulator spool. Reference figure 47.
Figure 286
Remove cross pin from sleeve
NOTE: Some units will have two cross pins the same
length. Some units will have two pins of different
lengths. The longest pin goes in the bottom hole.