JLG TF6-42 Service Manual - Manuale (Pagina 803)

T12000 ID 04/99 10-22
Reassembly 2nd clutch
Figure 115
Install inner and outer clutch piston seal rings.
Size inner ring as explained in figure 93.
Refer to the cleaning and inspection pages.
Figure 116
Position piston in clutch drum, using caution
as not to damage piston sealing rings.
Figure 117
Install clutch piston wear plate.
Figure 118
Install piston return disc springs. First spring with
large diameter of bevel towards wear plate.
Alternate (5) springs. NOTE: see page 10-85.
Figure 119
Position return spring ring retainer on clutch shaft.
Figure 120
Start ring on shaft with snap ring pliers.