JLG TF6-42 Service Manual - Manuale (Pagina 853)

T12000 ID 04/99 10-72
Reassembly converter housing
Figure 370
Install high-3rd clutch shaft oil distributor sleeve in
converter housing with inside diameter chamfer up
and the notch in the distributor aligned up with the
retaining set screw hole in the converter housing.
Figure 371
Apply loctite #243 to threads of sleeve set screw.
(NOTE: this set screw has a hole in it. Use caution
as not to allow any loctite to plug hole). Install set
screw in converter housing and in oil distributor.
Figure 372
Install set screw plug.