JLG TF6-42 Service Manual Manuale d'uso
Pagina 819
Advertising
T12000 ID
04/99
10-38
Reassembly 3rd clutch
Figure 199
Use a sleeve with the proper inner diameter to fit over
shaft and against retainer ring. A sharp blow with a
soft hammer will compress springs and retainer ring;
be sure ring is in full position in groove.
Figure 200
Install first steel (outer) clutch disc.
Figure 201
Install first friction (inner) clutch disc.
Alternate steel and friction until five (5) steel and five
(5) friction discs are in position.
Figure 202
Install clutch disc end plate.
Figure 203
Install end plate retainer ring.
Figure 204
Position thrust bearing inner washer on clutch shaft.
Advertising