JLG TF6-42 Service Manual - Manuale (Pagina 450)

Lubricate the bushing (18) and the seat of the steering case (3).
Install the bushing (18), using tool T7.
Lubricate the outer surface of the sealing ring (17) and centring ring
(16); fit them into their seat using tool T8.
Position the lower part of tool T9A and the thrust block of the
external bearing (8) under the press.
Lubricate the seats of the bearings and position the hub (7) on tool
T9A; position the thrust block of the internal bearing (15).
NOTE. Check that the thrust block is correctly oriented.
Position the upper part of tool T9B and press the thrust blocks into
the hub (7) all the way down.
Fit the bearing (15) into the internal thrust block.
GB GB
GB GB
GB GB
a b
c d
f e
48
ASSEMBLING THE PLANETARY REDUCTION - ASSEMBLAGGIO RIDUTTORE EPICICLOIDALE - PLANETENGETRIEB MONTIEREN -
MONTAJE REDUCTOR EPICICLOIDAL - ASSEMBLAGE DU REDUCTEUR EPICYCLOIDAL
F1240456
18
3 T 7
F1240457
T8
16 17
F1240458
T9A
8
F1240459
15
T9A
F1240460
7
T9B
F1240461
15