JLG TF6-42 Service Manual Manuale d'uso
Pagina 818
Advertising
T12000 ID
04/99
10-37
Reassembly 3rd clutch
Figure 193
Clutch piston bleed ball must be clean and
free of any foreign material. Refer to the cleaning
and inspection pages.
Figure 194
Install inner and outer clutch piston seal rings.
Size inner ring as explained in figure 93. Install clutch
piston in clutch drum. Use caution as not to damage
sealing rings.
Figure 195
Install clutch piston wear plate.
Figure 196
Install piston return disc springs. First spring with
large diameter of bevel towards wear plate.
Alternate five (5) springs. NOTE: see page 10-85.
Figure 197
Position return spring ring retainer on clutch shaft.
Figure 198
Start ring on shaft with snap ring pliers.
Advertising