Intel BLADE SERVER IXM5414E - Manuale (Pagina 93)

70 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
Port Mirroring Mode
Select the Port Mirroring Mode by selecting the corresponding line on the pull-
down entry field. The factory default is Disabled.
Probe Port The interface you want to act as the Probe. Once configured there is no network
connectivity on the probe port. The probe port will not forward or receive any
traffic. The probe tool attached to the probe port will not be able to ping the switch
or through the switch, and nobody will be able to ping the probe tool.
Port to be Mirrored
The interface selected as the Mirror. Every packet seen at the mirrored port is
copied to the probe port. That includes all packets received and admitted, received
and dropped, and transmitted out of the mirrored port.
Click the Delete button to remove the Port Mirroring configuration. The mode must be Disabled
before the configuration can be deleted.
Click the Apply button to update the switch with the values on this screen. If you want the switch to
retain the new values across a power cycle, you must perform a save.
SNMP
This menu provides access to the following Simple Network Management Protocol (SNMP)
options:
• Community configuration
• Trap receiver configuration
• Trap receiver summary
• Supported MIBs