Intel BLADE SERVER IXM5414E - Manuale (Pagina 122)

Web-Based Network Management 99
Port VLAN ID
The VLAN ID that this port will assign to untagged frames or priority tagged
frames received on this port if the acceptable frame types parameter is set to Admit
All. The factory default is 1.
Acceptable Frame Types
The types of frames that may be received on this port. The options are VLAN Only
and Admit All. When set to VLAN Only, untagged frames or priority tagged frames
received on this port are discarded. When set to Admit All, untagged frames or
priority tagged frames received on this port are accepted and assigned the value of
the Port VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN specification.
Ingress Filtering
Specifies whether Ingress Filtering is Enabled or Disabled on this port. When
Enabled, a frame is discarded if this port is not a member of the VLAN with which
the frame is associated. In a tagged frame, the VLAN is identified by the VLAN ID
in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified for the
port that received this frame. When Disabled, all frames are accepted and forwarded
in accordance with the 802.1Q VLAN bridge specification. The factory default is
Disabled.
Port Priority The VLAN Port Priority that this port will assign to untagged frames received on
this port.
Reset configuration
All VLAN configuration parameters are reset to their factory default values if you click the Reset
button and confirm your selection on the next screen. Also, all VLANs, except for the default
VLAN, will be deleted. The factory default values are:
• All ports are assigned to the default VLAN of 1.
• All ports are configured with a PVID of 1.
• All ports are configured to an Acceptable Frame Types value of Admit All Frames.
• All ports are configured with Ingress Filtering disabled.
• All ports are configured to transmit only untagged frames.
• GVRP is disabled on all ports and all dynamic entries are cleared.
• GVRP is disabled for the switch and all dynamic entries are cleared.
Protocol-based VLAN
This menu provides access to two protocol-based VLAN screens:
• Configuration
• Summary
Configuration
Use this panel to add a protocol-based VLAN group to the switch module, or reconfigure or delete
an existing group. When a new group is created, it will be assigned a Group ID that will be used to
identify it in subsequent processing.