Intel BLADE SERVER IXM5414E - Manuale (Pagina 128)

Web-Based Network Management 105
Leave Timer (centisecs)
Specifies the time to wait after receiving an unregister request for a VLAN or multicast
group before deleting the associated entry, in centiseconds. This allows time for another
station to assert registration for the same attribute in order to maintain uninterrupted service.
An instance of this timer exists for each GARP participant for each port. Permissible values
are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6
seconds).
Leave All Timer (centisecs)
This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. An instance of this timer exists for each GARP
participant for each port. The Leave All Period Timer is set to a random value in the range of
LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to
60 seconds). The factory default is 1000 centiseconds (10 seconds).
Switch configuration
Use this panel to Enable or Disable GVRP and GMRP for this switch. Note: It can take up to 10
seconds for GARP configuration changes to take effect.
GVRP Mode
Choose the GVRP administrative mode for the switch by selecting Enable or Disable from
the pull-down menu. The factory default is Disable.
GMRP Mode
Choose the GMRP administrative mode for the switch by selecting Enable or Disable from
the pull-down menu. The factory default is Disable.
Click the Apply button to update the switch with the values you enter. If you want the switch to
retain the new values across a power cycle you must perform a save.