Intel BLADE SERVER IXM5414E - Manuale (Pagina 240)

Command Line Interface Management 217
Packets Dropped
The number of RADIUS packets received from this server dropped for a reason not
otherwise included in this list.
show radius server summary
Use this command to display a summary of the configured RADIUS servers.
Format show radius server summary
Current Indicates the server currently in use for authentication.
IP Address The IP address of the authentication server.
Port The port used to access the authentication server.
Type Indicates whether the server is primary or secondary.
Secret configured
Indicates whether a secret has been configured for the authentication server.
Secure Shell (SSH) commands
config ssh adminmode
Use this command to enable or disable SSH.
Default Disabled
Format config ssh adminmode
<enable/disable>
config ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2)
or both (1 and 2) can be set.
Default both
Format config ssh protocol
<ssh1/ssh2/both>
show ssh info
Displays the SSH settings.
Format show ssh info
Administrative Mode
Indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or both versions 1
and 2.
Connections Specifies the current SSH connections.
Secure Socket Layer (SSL) commands
config http secureport
Use this command to configure the SSL port where port is between 1 and 65535.
Default 443
Format config http secureport <port>