Intel BLADE SERVER IXM5414E - Manuale (Pagina 217)

194 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
config protocol protocol add
Use this command to add the specified protocol to the protocol-based VLAN identified by
<groupid>. A group may have more than one protocol associated with it. Each interface and
protocol combination can only be associated with one group. If adding a protocol to a group causes
any conflicts with interfaces currently associated with the group, this command will fail and the
protocol will not be added to the group. The possible values for protocol are IP, ARP and IPX.
Format config protocol protocol add <groupid> <protocol>
config protocol protocol remove
Use this command to remove the <protocol> from the protocol-based VLAN group that is identified
by the <groupid>. The possible values for protocol are IP, ARP and IPX.
Format config protocol protocol remove <groupid> <protocol>
config protocol vlan add
Use this command to attach a <vlan> to the protocol-based VLAN identified by <groupid>. A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Format config protocol vlan add <groupid> <vlan>
config protocol vlan remove
Use this command to remove the <vlan> from the protocol-based VLAN group identified by the
<groupid>.
Format config protocol vlan remove <groupid> <vlan>
show protocol detailed
Use this command to display the protocol-based VLAN information for either the specified group or
for all groups.
Format show protocol detailed <groupid/all>
Group Name
This field displays the group name of an entry in the protocol-based VLAN table.
Group ID This field displays the group identifier of the protocol group.
Protocol(s) This field indicates the protocol(s) included in the group, one or more of IP, ARP
and IPX.
VLAN This field indicates the VLAN ID associated with this protocol group. All ports in
the group will assign this VLAN ID to untagged packets received for the protocols
identified for the group.
Interface(s) This field lists the port interface(s) that are associated with this protocol group. Note
that an interface can only belong to one group for a given protocol.
Spanning tree commands
Spanning tree bridge commands
config spanningtree bridge forwarddelay
Use this command to configure the Bridge Forward Delay parameter to a new value. Forwarddelay
is used by bridges to ensure that a new network topology has stabilized before leaving the blocking