Intel BLADE SERVER IXM5414E - Manuale (Pagina 112)

Web-Based Network Management 89
Configuration
Specify configuration when you want to update the switch's configuration.
If the file has errors the update will be stopped.
TFTP Server IP Address
Enter the IP address of the TFTP server. The factory default is 0.0.0.0.
TFTP File Path
This field specifies the directory path on the TFTP server where the file to be downloaded to
the switch is located. The switch will retain the last file path used.
TFTP File Name
This field specifies the name of the file that is to be downloaded to the switch. The switch
will remember the last file name used.
The last row of the table is used to display information about the progress of the file transfer. The
screen will refresh automatically until the file transfer completes.
The Intel® Blade Server Ethernet Switch Module IXM5414E software supports the use of a TFTP
client. The TFTP client path statement requirement is server dependent. A path statement is
generally required to setup the TFTP client; however, the client path may remain blank. See the
example of the path setup.
TFTP Upload Example:
The TFTP upload example details three scenarios for TFTP client-to-server file transfer. Each
scenario involves uploading the config.bin file from the switch to the location c:\tftp\ on the server.
The different scenarios are detailed below:
Click the Start File Transfer button to apply any changes made to the fields and initiate the
download.
Click the Apply button to send the updated screen to the switch; this does not perform the file
download.
Upload file from switch
Use this panel to configure the information needed to upload a file from the switch. See the previous
menu option “Download file to switch” on page 88 for more information about specifying TFTP File
Paths and Names.
Table 4. TFTP Upload Scenarios
TFTP Server path TFTP Client path
c:\tftp\ blank
c:\ tftp\
c: \tftp\