Radius configuration / summary commands, Radius configuration / summary commands 214 – Intel BLADE SERVER IXM5414E Manuale d'uso

Pagina 237

Advertising
background image

214

Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically

RADIUS configuration / summary commands

clear radius stats

Use this command to reset all RADIUS statistics for the switch. You will be prompted to confirm
this choice.

Format

clear radius stats

config radius maxretransmit

Use this command to configure the maximum number of times a request packet is retransmitted
when no response is received from the RADIUS server. The maxretransmit value is an integer in the
range of 1 and 15.

Consideration should be given to the maximum delay time when configuring RADIUS
maxretransmit and timeout values. If multiple RADIUS servers are configured, the maxretransmit
value on each will be exhausted before the next server is attempted. A retransmit will not occur until
the configured timeout value on that server has passed without a response from the RADIUS server.
Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum
of maxretransmit times timeout for all configured servers. If the RADIUS request was generated by
a user login attempt, all user interfaces will be blocked until the RADIUS application returns a
response.

Default

4

Format

config radius maxretransmit <1-15>

config radius timeout

Use this command to configure the timeout value (in seconds) after which a request must be
retransmitted to the radius server if no response is received.

Consideration should be given to the maximum delay time when configuring RADIUS
maxretransmit and timeout values. If multiple RADIUS servers are configured, the maxretransmit
value on each will be exhausted before the next server is attempted. A retransmit will not occur until
the configured timeout value on that server has passed without a response from the RADIUS server.
Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum
of maxretransmit times timeout for all configured servers. If the RADIUS request was generated by
a user login attempt, all user interfaces will be blocked until the RADIUS application returns a
response.

Default

5

Format

config radius timeout <1-30>

show radius stats

Use this command to display RADIUS statistics for the switch that are not associated with a specific
server or accounting server.

Format

show radius stats

Invalid Server Address

The number of RADIUS access response packets received from an unknown
address.

show radius summary

Use this command to display a summary of the RADIUS configuration parameters for the switch.

Format

show radius summary

Advertising