Intel BLADE SERVER IXM5414E - Manuale (Pagina 39)

16 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
Removing the IXM5414E switch module
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this
label attached. There are no serviceable parts inside these components. If you suspect a
problem with one of these parts, contact a service technician.
Complete the following steps to remove the IXM5414E switch module.
1. Select an appropriate I/O module bay from which to remove a switch module, in accordance
with the instructions in “Ethernet interface requirements” on page 9.
2. Unplug any cables from the selected switch module.
3. For the SB-HE platform, pull the release latch toward the side of the switch module as shown in
the second illustration. The module moves out of the I/O module bay about 0.64 cm (0.25 inch).
SB-HE