Intel BLADE SERVER IXM5414E - Manuale (Pagina 231)

208 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
config dot1x port initialize
Use this command to begin the initialization sequence on the specified port. This command is only
valid if dot1x is enabled and the control mode for the specified port is “auto”.
Default disable
Format config dot1x port initialize <port>
config dot1x port maxrequests
Use this command to configure the maximum number of times the authenticator state machine on
the specified port will retransmit an Extensible Authentication Protocol Over LANs (EAPOL) EAP
Request/Identity before timing out the supplicant. The maximum requests value must be in the range
of 1 and 10.
Default 2
Format config dot1x port maxrequests <port> <1-10>
config dot1x port quietperiod
Use this command to configure the value, in seconds, of the timer used by the authenticator state
machine on the specified port to define periods of time in which it will not attempt to acquire a
supplicant. The quiet period is the period for which the authenticator does not attempt to acquire a
supplicant after a failed authentication exchange with the supplicant. The quiet period must be a
value in the range of 0 and 65535.
Default 60
Format config dot1x port quietperiod <port> <0-65535>
config dot1x port reauthenabled
Use this command to enable or disable reauthentication of the supplicant for the specified port. The
reauthenabled value must be true or false. If the value is true reauthentication will occur. Otherwise,
reauthentication will not be allowed.
Default false
Format config dot1x port reauthenabled <port> <true/false>
config dot1x port reauthenticate
Use this command to begin the reauthentication sequence on the specified port. This command is
only valid if dot1x is enabled and the control mode for the specified port is “auto”.
Default disable
Format config dot1x port reauthenticate <port>
config dot1x port reauthperiod
Use this command to configure the value, in seconds, of the timer used by the authenticator state
machine on this port to determine when reauthentication of the supplicant takes place. The
reauthperiod must be between 1 and 65535.
Default 3600
Format config dot1x port reauthperiod <port> <1-65535>