Intel BLADE SERVER IXM5414E - Manuale (Pagina 113)

90 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
File Type
This field sets the type of file to be uploaded from the switch. The datatype is one of the
following:
config Configuration file
errorlog Error log
msglog Message log
TFTP Server IP Address
Enter the IP address of the TFTP server. The factory default is 0.0.0.0.
TFTP File Path
This field specifies the directory path on the TFTP server where the file to be uploaded from
the switch is to be located. The switch will remember the last file path used.
TFTP File Name
This field specifies the name of the file that is to be uploaded from the switch. The switch
will remember the last file name used.
The last row of the table is used to display information about the progress of the file transfer. The
screen will refresh automatically until the file transfer completes.
Click the Start File Transfer button to apply any changes made to the fields and initiate the upload.
Click the Apply button to send the updated screen to the switch; this does not perform the file
upload. This command is valid only when the transfer mode is TFTP.
Ping
Use this panel to have the switch transmit a Ping request to a specified IP address. This checks
whether the switch can communicate with a particular IP device. Once you click the Apply button,
the switch will send three pings and the results will be displayed in the Ping field, below the IP
address.