Vertex Standard VX-8R - Manual (Page 86)

VX-8R O
PERATING
M
ANUAL
84
Deleting a Received Beacon from the “STATION LIST”
1. Press the key several times until the STATION LIST
screen appears on the display.
2. Rotate the DIAL knob (or press the / keys) to select
the beacon station to be deleted.
3. Press the key. The confirmation message (DELETE? DELETE? DELETE? DELETE? DELETE? )
will appear on the display. Press the key once more, the
selected beacon station will be deleted from the STATION
LIST.
APRS F
ILTER
S
ETTING
The APRS filter option allows you to receive only specified types of the data.
1. Press the
key several times until the STATION LIST
screen appears on the display.
2. Press and hold the key for one second to enter the APRS/
GPS Set Mode.
3. Rotate the DIAL knob to select Set Mode Item 3: APRS 3: APRS 3: APRS 3: APRS 3: APRS
FILTER FILTER FILTER FILTER FILTER .
4. Press the key briefly to enable adjustment of this Set
Mode Item.
5. Press the / key to select the “Filter” you wish to
exclude, then rotate the DIAL knob to select “OFF OFF OFF OFF OFF ”.
6. Repeat above steps and select “OFF OFF OFF OFF OFF ” to any other filters you
wish to exclude.
7. When you have completed your selection, press the PTT switch to save the new
setting and exit to the STATION LIST screen.
APRS ® O
PERATION
R
ECEIVING AN
APRS B
EACON