Vertex Standard VX-8R - Manual (Page 160)

VX-8R O
PERATING
M
ANUAL
158
S
ET
M
ODE
I
TEM
95: SQL TYPE
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: OFF / TONE / TONE SQL / DCS / REV TONE / PR FREQ / PAGER
/ MESSAGE
Default: OFF
TONE:
Activates the CTCSS Encoder
TONE SQL: Activates the CTCSS Encoder/Decoder
DCS:
Activates the Digital Coded Squelch Encoder/Decoder
REV TONE: Activates the Reverse CTCSS Encoder/Decoder (Mutes the receiver when
the matching tone is received).
PR FREQ: Activates the User Programmed Reverse CTCSS Encoder/Decoder (Mutes
the receiver when the matching tone with Set Mode Item 76: PR FRE-
QUENCY is received).
PAGER: Activates the Enhanced Paging & Code Squelch.
MESSAGE: Activates the Message feature.
Note: See also Set Mode Item 93: SQL SPLIT regarding additional selections available
during “Split Tone” operation.
S
ET
M
ODE
I
TEM
96: STEP FREQUENCY
Function: Setting of the DIAL frequency steps.
Available Values: AUTO / 5.0 / 6.25 / 8.33 / 9.0 / 10.0 / 12.5 / 15.0 / 20.0 / 25.0 / 50.0 /
100.0 kHz
Default: AUTO (Step automatically changes according to operating frequency.)
Note: 1) This Set Mode Item can select and set the Dial frequency steps to individual
memory channels when Memory Offset Tuning is enabled as shown on page 51.
2) 9.0 kHz steps are available only when receiving on the AM Broadcast band.
3) 8.33 kHz steps are available only when receiving on the Air band.
4) While operating on the AM Broadcast band, you may only select channel steps of 9.0
kHz or 10.0 kHz; the other step selections are disabled.
5) 5.0 kHz steps are not available for use on 250 - 300 MHz, nor above 580 MHz.
S
ET
M
ODE
I
TEM
97: STEREO
Function: Enables/Disables the stereo output while receiving the FM Broadcast band.
Available Values: STEREO / MONO
Default: STEREO
S
ET
M
ODE
I
TEM
98: TIME SET
Function: Sets the Clock time.
See page 120 for details.
S
ET
M
ODE
S
ET
M
ODE
S
ELECTION
D
ETAILS