Vertex Standard VX-8R - Manual (Page 150)

VX-8R O
PERATING
M
ANUAL
148
S
ET
M
ODE
3. Rotate the DIAL knob to select the first letter/number of the message, then press the
key briefly to save the first letter/number and move on to the next character.
4. Repeat the previous step as necessary to complete the message (up to 16 characters).
5. If you make a mistake, press the
key to backspace the cursor; now re-enter the
correct letter/number.
6. Press and hold the key for two seconds to delete all data after the cursor that may
have been previously stored erroneously.
7. When you have entered the message, press the key again to confirm the mes-
sage, then press the PTT switch to save the settings and exit to normal operation.
S
ET
M
ODE
I
TEM
35: EXTENDED MENU
Function: Enables/Disables the extended Set Mode Menu.
Available Values: ON / OFF
Default: OFF
S
ET
M
ODE
I
TEM
36: FW KEY HOLD TIME
Function: Set the duration time that the key must be held to activate the secondary
function.
Available Values: FW0.3sec / FW0.5sec / FW0.7sec / FW1.0sec / FW1.5sec
Default: FW0.5sec
S
ET
M
ODE
I
TEM
37: HALF DEVIATION
Function: Reducing the Deviation level by 50 %.
Available Values: ON/OFF
Default: OFF
S
ET
M
ODE
I
TEM
38: HOME VFO
Function: Enables/Disables the function of the VFO DIAL knob, while in the Home Chan-
nel mode.
Available Values: DISABLE / ENABLE
Default: ENABLE
S
ET
M
ODE
I
TEM
39: HOME/REVERSE
Function: Selects the function of the key.
Available Values: HOME / REV
Default: REV
HOME: Pressing the
key instantly recalls a favorite “Home” channel.
REV: Pressing the key reverses transmit and receive frequencies during repeater
operation.
S
ET
M
ODE
S
ELECTION
D
ETAILS