Bluetooth, Peration, Vx-8r o – Vertex Standard VX-8R User Manual

Page 75

Advertising

VX-8R O

PERATING

ANUAL

Bluetooth

PERATION

CTIVATION

1. Press and hold the

key for one second to enter the Set Mode.

2. Rotate the DIAL knob to select Set Mode Item 17:

17:

BLUETOOTH SET

3. Press the

key briefly to enable selection of this Set Mode

Item.

4. Rotate the DIAL knob to select the TX/RX switching cir-

cuit of the Bluetooth

function:

VOX: OFF

Disable the TX/RX switching circuit of
the Bluetooth

function (RX only).

VOX: PTT

Activates the Bluetooth

function for use with the PTT circuit.

VOX: VOX HIGH

: Activates the Bluetooth

function with the VOX feature (VOX

Gain: High).

VOX: VOX LOW

: Activates the Bluetooth

function with the VOX feature (VOX

Gain: Low).

5. Press the

key, then rotate the DIAL knob to select the

Battery Saver function:
SAVE: ON

SAVE: ON

: Activates the Battery Saver in the BH-1 (or

BH-2).
If there has been no signal or key activity for 20 seconds, the Battery
Saver automatically puts the BH-1 (or BH-2) to “sleep”, to conserve
battery life. When a signal is received or the PTT switch is pressed, the
BH-1 (or BH-2) will wakeup and become active again.
Furthermore, if there has been no signal or key activity for 10 minutes,
the BH-1 (or BH-2) will turn off automatically.

SAVE: OFF

: Disable the Battery Saver in the BH-1 (or BH-2).

6. Press the

key, then rotate the DIAL knob to select the

receiver audio output mode of the Bluetooth

unit (this

parameter is ignored when using the BH-2 Bluetooth

Headset):
MODE: STEREO

MODE: STEREO

: Outputs stereo receive audio while listening to the FM Broadcast

band.
Note: When this mode is selected, the VOX function does not work
even if the VOX function is selected in step 4. above. The TX/RX
switching is performed by pressing the PTT switch.

MODE: MONO

: Outputs monaural receive audio while listening to the FM Broad-

cast band.

7. If you wish to turn the Bluetooth

unit off to conserve transceiver battery power

when you are not operating the Bluetooth

function, perform the following proce-

dures, otherwise, skip to next step.

Advertising

Popular Brands

Popular manuals