Vx-8r o, Perating, Anual – Vertex Standard VX-8R User Manual
Page 143
VX-8R O
PERATING
M
ANUAL
141
S
ET
M
ODE
DTMF S
ETTING
Selects the DTMF Autodialer Delay Time.
Enables/Disables the DTMF Autodial feature.
Programming the DTMF Autodialer.
Selects the DTMF Autodialer Sending Speed.
S
WITCH
/K
NOB
S
ETTING
Set the duration that a secondary function of the [F/W] key (press and holding the [F/W] key) is held
determines the function they activate.
Selects the function of the [H/M] key.
Selects the Control Locking lockout combination.
Selects the MONI key (just below the PTT switch) function.
Selects the time delay before the carrier is transmitted, when the PTT switch is pressed.
Select the [VOL] key function.
D
ISPLAY
S
ETTING
Indicates the DC Supply Voltage.
Selects the LCD/Keypad Lamp mode.
Setting the Display contrast level.
Setting the Display brightness level.
Illuminates the white LED light continuously (useful as emergency flashlight at night).
Selects the Opening Message that appears when the radio is powered on.
Selects the sensor information when the transceiver is operating in the “Mono” band mode with large
character.
Displays internal sensor information.
Selects the S- & TX PO meter Symbol.
Selects the Spectrum Analyzer sweep mode.
Calibrating the Sensor Unit.
Selects the measurement units of the Sensor Unit.
Selects the Wave-Form display while indicating the Wave-Form via Set Mode Item 84: SENSOR DISPLAY.
B
EEP
S
ETTING
Enables/Disables the Band-edge beeper while selecting the frequency with the DIAL knob.
Adjust the Beep volume level.
Create the Beep Melody for Bell ringer function.
Enables/Disables the keypad beeper.
Select the CW tone pitch for the CW Learning, CW Training, and CW Identifier functions.
M
ISCELLANEOUS
S
ETTING
Select the antenna to be used for the AM Broadcast listening.
Enables/Disables the receiver Front-end Attenuator.
Select the antenna to be used for the FM Broadcast listening.
Enables/Disables the Busy Channel Lock-Out feature.
Selects the Channel Counter Search Width.
Shifting of CPU clock frequency.
Enables/Disables the CW Learning feature.
Enables/Disables the CW Training feature.
Enables/Disables the extended Set Mode Menu.
Reducing the Deviation level by 50 %.
Enables/Disables the function of the VFO DIAL knob, while in the Home Channel mode.
Selects the language for the Set Mode selections.
Adjusts the microphone gain level.
Adjusts the receiver audio output level when the MUTE function was activated.
Set the OFF Timer time.
Set the ON Timer time.
Programming and activating the Password feature.
Select the resume mode of the AF-Dual Operation.
Sets the receiving mode.
Selects the Set Mode Cursor.
Selects the display format of the Set Mode operation.
Selects the Smart Search Sweep mode.
Enables/Disables the FM Broadcast audio output to the internal speaker when using the earphone antenna.
Sets the Squelch threshold level.
Adjusts the Squelch threshold level to the S-meter level.
Setting of the DIAL frequency steps.
Enables/Disables the stereo output while receiving the FM Broadcast band.
Sets the Clock time.
Setting of the TOT time
Selects or disables the VFO band edge limiting for the current band.
Set My Band.
Enables/Disables VOX operation; sets VOX sensitivity.
Selects the VOX delay (“hang”) time.
Enables/Disables the Weather Alert Feature
S
ET
28:
29:
30:
31:
S
ET
36:
39:
51:
61:
73:
107:
S
ET
25:
46:
48:
49:
50:
65:
84:
85:
89:
91:
103:
104:
110:
S
ET
10:
11:
12:
13:
23:
S
ET
1:
2:
3:
9:
19:
20:
22:
24:
35:
37:
38:
47:
60:
62:
63:
64:
69:
77:
78:
86:
87:
88:
90:
92:
93:
96:
97:
98:
102:
105:
106:
108:
109:
111:
M
ODE
I
TEM
DTMF DELAY
DTMF MANUAL/AUTO
DTMF SELECT
DTMF SPEED
M
ODE
I
TEM
FW KEY HOLD TIME
HOME/REVERSE
LOCK
MONI/T-CALL
PTT DELAY
VOLUME MODE
M
ODE
I
TEM
DC VOLTAGE
LAMP
LCD CONTRAST
LCD DIMMER
LED LIGHT
OPENING MESSAGE
SENSOR DISPLAY
SENSOR INFORMATION
S-METER SYMBOL
SPEC-ANALYZER
UNIT OFFSET
UNIT SELECT
WAVE MONITOR
M
ODE
I
TEM
BEEP EDGE
BEEP LEVEL
BEEP MELODY
BEEP SELECT
CW PITCH
M
ODE
I
TEM
ANTENNA AM
ANTENNA ATT
ANTENNA FM
BCLO
CH COUNTER
CLOCK SHIFT
CW LEARNING
CW TRAINING
EXTENDED MENU
HALF DEVIATION
HOME VFO
LANGUAGE
MIC GAIN
MUTE
OFF TIMER
ON TIMER
PASSWORD
RX AF DUAL
RX MODE
SET MODE CSR
SET MODE FORMAT
SMART SEARCH
SPEAKER OUT
SQL LEVEL
SQL S-METER
STEP FREQUENCY
STEREO
TIME SET
TOT
VFO MODE
VFO SKIP
VOX
VOX DELAY
WX ALERT
A
VAILABLE
V
ALUES
(D
EFAULT
: B
OLD
I
TALIC
)
50ms / 250ms / 450ms / 750ms / 1000ms
MANUAL / AUTO
--
50mS / 100mS
A
VAILABLE
V
ALUES
(D
EFAULT
: B
OLD
I
TALIC
)
0.3sec / 0.5sec / 0.7sec / 1.0sec / 1.5sec
HOME / REV
KEY / DIAL / KEY&DIAL / PTT / KEY&PTT /
DIAL&PTT / ALL
MONI / T-CALL
OFF / 20ms / 50ms / 100ms / 200ms
NORMAL / AUTO BACK
A
VAILABLE
V
ALUES
(D
EFAULT
: B
OLD
I
TALIC
)
--
KEY 2sec - KEY 10sec / CONTINUOUS /
OFF (KEY 5sec)
LEVEL 1 ~ LEVEL32 (LEVEL24)
LEVEL 1 ~ LEVEL 4
--
NORMAL / OFF / DC / MESSAGE
DC / TEMP / WAVE / BARO / ALTI / WX / OFF
--
Four patterns
1Time / Continuous / Full Time
BARO: -1000 ~ 0 ~ +1000,
ALTITUDE: -1000 ~ 0 ~ +1000
TEMP: °C / °F,
BARO: HPA / mb / mmHg / inch,
ALTITUDE: m / ft
ALL / RX SIGNAL / TX MODULATION
A
VAILABLE
V
ALUES
(D
EFAULT
: B
OLD
I
TALIC
)
ON / OFF
LEVEL 1 - LEVEL 9 (LEVEL 5)
--
KEY & SCAN / KEY / OFF
400 - 1000 Hz (50 Hz/step) (700 Hz)
A
VAILABLE
V
ALUES
(D
EFAULT
: B
OLD
I
TALIC
)
BAR & EXT / BAR ANTENNA
ON / OFF
EXT ANTENNA / EARPHONE
ON / OFF
±5 MHz / ±10 MHz / ±50 MHz / ±100 MHz
ON / OFF
--
--
ON / OFF
ON / OFF
DISABLE / ENABLE
ENGLISH / JAPANESE
LEVEL 1 ~ LEVEL 9 (LEVEL 5)
MUTE 30%,MUTE 50%, MUTE 100%, or OFF
--
--
--
TRX 1sec ~ TRX 10sec /
HOLD / TX 1sec ~ TX 10sec (TRX 2sec)
AUTO / NFM / AM / WFM
Nine patterns
LIST / ITEM
SINGLE / CONTINUOUS
AUTO / SPEAKER
LEVEL 0 ~ LEVEL 15 (LEVEL 1)
(AM and Narrow FM),
LEVEL 0 ~ LEVEL 8 (LEVEL 2)
(Wide FM and AM Broadcast)
OFF / LEVEL 0 ~ LEVEL 9
AUTO / 5.0 /6.25 / 8.33 / 9.0 / 10.0 / 12.5 / 15.0 /
20.0 / 25.0 / 50.0 / 100 kHz
STEREO / MONO
--
OFF / 0.5min ~ 10.0min (0.5min/step) (3.0min)
ALL / BAND
--
OFF / HIGH / LOW
0.5sec / 1.0sec / 2.0sec
ON / OFF