Vertex Standard VX-8R - Manual (Page 56)

VX-8R O
PERATING
M
ANUAL
54
M
EMORY
M
ODE (R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
5. To change to another Memory Bank, press the key, then press the key. Now
rotate the DIAL knob to select the new Memory Bank, then press the key again.
6. To exit from Memory Bank operation, just press the key. The Memory Bank
number will be replaced by the “MR MR MR MR MR ”, and you are now in the “regular” Memory
Recall mode, without utilization of the Memory Banks. The memories stored in the
various Banks will remain in those banks. You do not need to store them again.
R
EMOVING
M
EMORIES FROM A
M
EMORY
B
ANK
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold the
key for 1/2 second, then press the key to remove the
memory channel data from the Memory bank.
C
HANGING A
M
EMORY
B
ANK ’ S
N
AME
You may change the default Memory Bank Names, which are shown on the display while
selecting the Memory Bank your desire.
1. Press and hold in the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select the Set Mode Item 8: BANK 8: BANK 8: BANK 8: BANK 8: BANK
NAME NAME NAME NAME NAME .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the memory bank on which
you wish to change a label.
5. Press the key briefly to enable changing of the name
tag.
6. Rotate the DIAL knob, or press one of the keyboard keys,
to select the first digit of the desired label.
Example 1: Rotate the DIAL knob to select any of the 61
available characters.
Example 2: Press the key repeatedly to toggle among
the seven available characters associated with
that key: a Æ b Æ c Æ A Æ B Æ C Æ 2
7. Press the key to move to the next character.
8. Repeat steps 6 and 7 to program the remaining letters, num-
bers, or symbols of the desired label. A total of 16 charac-
ters may be used in the creation of a label.
9. If you make a mistake, press the key to backspace the
cursor, then re-enter the correct letter, number, or symbol.
10. When you have completed the changes of the label, press the PTT switch to save the
label and exit.
M
EMORY
B
ANK
O
PERATION