Vertex Standard VX-8R - Manual (Page 27)

VX-8R O
PERATING
M
ANUAL
25
S
ETTING THE
AF-D
UAL
R
ESUME
M
ODE
The VX-8R allows you to select the resume mode of the AF-Dual Operation
when a signal is received in the amateur band.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 77: 77: 77: 77: 77:
RX AF DUAL RX AF DUAL RX AF DUAL RX AF DUAL RX AF DUAL .
3. Press the key briefly to enable selection of this
Menu Item.
4. Rotate the DIAL knob to select the desired resume
mode of the AF-Dual Operation:
TX 1sec - TX 10sec
TX 1sec - TX 10sec TX 1sec - TX 10sec TX 1sec - TX 10sec TX 1sec - TX 10sec : Sets the period of time
after you transmit an
amateur signal before the AM or FM Broadcast sta-
tion will be heard from the speaker, and the AF-
Dual Operation is resumed. However, if a signal is
received in the amateur band, the AF-Dual Opera-
tion will halt on the amateur band frequency and
the AF-Dual Operation does not resume.
TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec TRX 1sec - TXR 10sec : When the selected time passes after the amateur
band signal drops or transmission is over, the AM
or FM Broadcast station will be heard from the
speaker and the AF-Dual Operation is resumed.
HOLD HOLD HOLD HOLD HOLD : When a signal is received in the amateur band or if
you transmit on the amateur band, the AF-Dual Op-
eration will halt on the amateur band frequency (the
AF-Dual Operation does not resume.). You must
manually re-initiate the AF-Dual Operation, if you
wish to resume.
5. When you have made your selection, press the PTT switch to save the new
setting and resume normal mode.
AM
AND
FM B
ROADCAST
R
ECEPTION
O
PERATION