Vertex Standard VX-8R - Manual (Page 133)

VX-8R O
PERATING
M
ANUAL
131
D
ISPLAY
C
ONTRAST
The LCD’s contrast may be adjusted for best viewing in sunlight or darkness allowing for
best readability using the Set Mode Item.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 48: LCD 48: LCD 48: LCD 48: LCD 48: LCD
CONTRAST CONTRAST CONTRAST CONTRAST CONTRAST .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to adjust the contrast. As you make
the adjustment, you will be able to see the effects of your
changes. The available selections are LEVEL 1
LEVEL 1 LEVEL 1 LEVEL 1 LEVEL 1 - LEVEL 32 LEVEL 32 LEVEL 32 LEVEL 32 LEVEL 32
(factory default: LEVEL 24 LEVEL 24 LEVEL 24 LEVEL 24 LEVEL 24 ).
5. When you have completed your selection, press the PTT switch to save the new
setting and exit to normal operation.
D
ISPLAY
D
IMMER
The LCD and keypad illumination may be adjusted using the Set Mode Item, as well.
1. Press and hold the key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 49: LCD 49: LCD 49: LCD 49: LCD 49: LCD
DIMMER DIMMER DIMMER DIMMER DIMMER .
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to adjust the display illumination for
a comfortable brightness level. As you make the adjustment,
you will be able to see the effects of your changes. The
available selections are LEVEL 1
LEVEL 1 LEVEL 1 LEVEL 1 LEVEL 1 - LEVEL 4 LEVEL 4 LEVEL 4 LEVEL 4 LEVEL 4 (factory default:
LEVEL 4 LEVEL 4 LEVEL 4 LEVEL 4 LEVEL 4 ).
5. When you have completed your selection, press the PTT switch to save the new
setting and exit to normal operation.
M
ISCELLANEOUS
S
ETTING