Vertex Standard VX-8R - Manual (Page 76)

VX-8R O
PERATING
M
ANUAL
74
Press the key, then rotate the DIAL knob to select the
“POWR POWR POWR POWR POWR ” parameter to “OFF OFF OFF OFF OFF ”.
8. Press the PTT switch of the VX-8R to save the new setting
and return to normal operation.
O
PERATION
1. When the BH-1 (or BH-2) is correctly recognized by the VX-8R, “ ” icon will
appear on the display of the VX-8R and the LED indicator of the BH-1 (or BH-2)
will blink blue.
2. Adjust the receiver audio level using the [VOLUME(+)]/[VOLUME(–)] switches on
the BH-1 (or BH-2). Pressing the [VOLUME(+)] switch increases the receiver audio
level. Pressing the [VOLUME(–)] switch decreases the receiver audio level.
3. Press the PTT switch on the BH-1 (or BH-2) to transmit. Release the PTT switch to
return to receive.
4. You may adjust the microphone gain (Five steps) of the BH-2 by pressing the [VOL-
UME(+)]/[VOLUME(–)] switch while pressing and holding the PTT switch, if de-
sired.
Pressing the [VOLUME(+)] switch while pressing and holding the PTT switch in-
creases the microphone level. Pressing the [VOLUME(–)] switch while pressing and
holding the PTT switch decreases the microphone level. When the microphone gain
reaches maximum or minimum, a beep will be heard in the BH-2 speaker.
5. The communication range between the BH-1 (or BH-2) and VX-8R is around 1 m (3
ft). If you move out of range, a beep will be heard from the BH-1 (or BH-2) to alert
you. If you move back into range, the BH-1 (or BH-2) will beep to alert you that you
are back within range.
6. When the battery voltage of the BH-1 (or BH-2) is low;
a. the LED will blink Red and Blue.
b. a beep will be heard from the BH-1 (or BH-2).
c. the “ ” icon on the VX-8R will be blinking fast.
Charge the BH-1’s (or BH-2’s) battery with the optional CD-40 Charger Cradle.
When the BH-1 (or BH-2) is correctly recognized, the VX-8R’s internal speaker and
microphone are disabled.
Bluetooth ® O
PERATION
O
PERATING
B
AND
BH-1/BH-2 B
ATTERY
L
IFE
B
ATTERY
L
IFE
(A
PPROX
.)
BH-2
6 hours
Battery Saver “ON”: 20 hours
Battery Saver “OFF”: 3 hours
BH-1
3 hours
Battery Saver “ON”: 10 hours
Battery Saver “OFF”: 3 hours
AM/FM Broadcast Band
Amateur Band
(1:1:8 TX:RX:Standby)