Riello UPS MultiCOM 301/302 - Manuale (Pagina 30)

- ENGLISH -
- 30 -
A DVANCED CONFIGURATION
Through the MultiSetup.exe program, which is found on the CD-Rom supplied, you can configure
all the communication parameters of the SERIAL 2 port (protocol, baud rate, parity and stop bit)
and set the protocol used by the UPS. To use the program, connect the SERIAL 1 port to any
serial port of the PC by means of the null-modem cable provided. To make the chosen
configuration effective, the accessory must be powered down and then powered up.
F IRMWARE UPGRADE
The firmware of the device can be upgraded The upgrading files and the instructions needed are
available from the manufacturer’s internet site.