Videotec DCJ - Manuale (Pagina 211)

Page 79 MNVADCJ01_0543
6.8 Eneo Pan & Tilt
6.8.1 Materials a nd reference documents
Eneo Pan & Tilt VPT-42/RS1.
Protocol documents PC COMMAND-v3.0VT e VT-ASCII.
6.8.2 Connection s
6.8.2.1 Cable
White
Yellow
RS485A
RS485B
RS485 RX+/
TTY 20 mA
RS485 RX-/
TTY 20 mA
Eneo VPT-42/RS1
6.8.2.2 Configuring the pan & tilt
The number of the pan & tilt must be configured correctly. See the corresponding manual.
6.8.2.3 Configuring the keyboard
When configuring the keyboard, the RRQRO submenu should be set up as follows:
PROP
5272*2UD1,2
211,*7PD,UPO
(8+5(7,D%"
The baud rate should correspond to the one selected for the
pan & tilt.
6.8.3 Configuring the pan & tilt
Settings for all pan & tilt parameters requiring configuration are made by pressing a combination of keys or
byinserting a special code.
For all pan & tilt setup operations the keyboard should be enabled for TELEMETRY SETUP
(
Q RQP menu ).
The menu for pan & tilt setup is entered by pressing
-
:

8723(1
7(1+(5+(752U
(1+20(752U
 20,:,UU
5,6,73,,+
The items in the setup menu are described below.
Individual settings can be recalled one at a time using
combinations of dedicated keys:
- autopan setup
-
standard patrol setup
-6
random patrol setup
-
home position setup
-
preset speed setup.