Videotec DCJ - Manuale (Pagina 191)

Page 59 MNVADCJ01_0543
5.17 Everfocus DVR
5.17.1 Description
Everfocus Digital Video Recorders (EDSR400, EDSR100, EDSR900, EDSR1600 and the respective H
versions) are professional devices used to record video signals. Each video input provides a videoloop. Each
unit features a main video output and a call video output.
Communication from keyboard to DVR is monodirectional.
5.17.2 Connection s
5.17.2.1 Cable
DCJ RJjack 1 RJjack 2 DVR
RS485A white yellow RS485A
RS485B yellow black RS485B
5.17.2.2 DVR setting s
Using the local DVR keyboard set the communication baudrate and a proper ID number in RS232/RS485
SETTING MENU. Only RS485 parameters have to be considered: set STOP BIT 1, parity NONE, data bit 8.
5.17.2.3 Keyboard se ttings
During keyboard setup, submenu RRQRR must be suitably set:
RRRP
<3,D
5272*2UD;
(8+5(7,D%"
Select the proper baudrate and DVR model.
5.17.2.4 Operational test
When the keyboard is connected directly to the DVR, using a cable as shown above, it should be immediately
possible to switch video channels:
• push [  DEVICE ] and choose a DVR number
• push [  CH ] ! , [  CH ] " to select a video channel (confirm with  when required)
5.17.3 DVR Config uration
The DVR is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
Configuration controlled by a remote keyboard is allowed only in DVR mode, pushing [  MENU ].