Pioneer VSX-415-S/-K - Manuale (Pagina 49)

The System Setup menu 08
49
En
English
Français
Deutsch
Nederlands
Italiano
Español
1 Select SP SET from the SP SETUP menu.
2 Use / (cursor left/right) to choose the
speaker(s) that you want to set then select a
speaker size.
Use / (cursor up/down) to select the size
(and number) of each of the following
speakers:
• Front ( F ) – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn’t connect a
subwoofer. Select
SMALL to send the bass
frequencies to the subwoofer. 1
• Center ( C ) – Select LARGE if your center
speaker reproduces bass frequencies
effectively, or select
SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect a center
speaker, choose
NO (the center channel is
sent to the front speakers).
• Surround ( S ) – Select LARGE if your
surround speakers reproduce bass
frequencies effectively. Select
SMALL to
send bass frequencies to the other
speakers or subwoofer. If you didn’t
connect surround speakers choose
NO
(the sound of the surround channels is
sent to the front speakers or a subwoofer).
• Surround Back ( SB ) – Select LARGE if your
surround back speakers reproduce bass
frequencies effectively. Select
SMALL to
send bass frequencies to the other
speakers or subwoofer. If you didn’t
connect surround back speakers choose
NO . 2
• Subwoofer ( SW ) – LFE signals and bass
frequencies of channels set to SMALL are
output from the subwoofer when YES is
selected (see notes below). Choose the
PLUS setting if you want the subwoofer to
output bass sound continuously or you
want deeper bass (the bass frequencies
that would normally come out the front and
center speakers are also routed to the
subwoofer). If you did not connect a
subwoofer choose
NO (the bass
frequencies are output from other
speakers).
3 When you’re finished, press RETURN.
Tip
• If you have a subwoofer and like lots of
bass, it may seem logical to select LARGE
for your front speakers and PLUS for the
subwoofer. This may not, however, yield the
best bass results. Depending on the
speaker placement of your room you may
actually experience a decrease in the
amount of bass due low frequency
cancellations. In this case, try changing
the position or direction of speakers. If you
can’t get good results, listen to the bass
response with it set to
PLUS and YES or the
front speakers set to LARGE and SMALL
alternatively and let your ears judge which
sounds best. If you’re having problems, the
easiest option is to route all the bass
sounds to the subwoofer by selecting
SMALL for the front speakers.
Crossover network
• Default setting: 100Hz
This setting decides the cutoff between bass
sounds playing back from the speakers
selected as
LARGE , or the subwoofer, and bass
sounds playing back from those selected as
SMALL . 3 It also decides where the cutoff will
be for bass sounds in the LFE channel.
Note
1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES . Also, the center, surround and
surround back speakers can’t be set to LARGE if the front speakers are set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
2 If the surround speakers are set to
NO, the surround back speakers will automatically be set to NO.
3 For more on selecting the speaker sizes, see Speaker setting above.
VSX_415-515.fm 49 ページ ２００５年１月２１日 金曜日 午後５時３分