Choosing the input signal, Listening to your system 06 – Pioneer VSX-415-S/-K Manuale d'uso
Pagina 35
Listening to your system
06
35
En
English
Français
Deutsch
Nederlands
Italiano
Español
The MCACC indicator on the front panel lights
when Acoustic Calibration EQ is active.
1
Choosing the input signal
• Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
2
VSX-515 model:
VSX-415 model:
•
Press
SIGNAL SELECT
to select the input
signal corresponding to the source compo-
nent.
Each press cycles through the options as
follows:
•
AUTO
– This automatically switches to
DIGITAL
if a digital source is detected,
otherwise it remains on
ANALOG
.
•
ANALOG
– Selects the analog inputs.
•
DIGITAL
– Selects the digital input.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input, and
DTS
lights when a DTS signal is input.
Note
1 • You can’t use Acoustic Calibration EQ when
DVD 5.1ch
is on, and it has no effect when headphones are connected.
• If you switch on Acoustic Calibration EQ when
DIRECT
is selected, the receiver automatically switches to
STEREO
.
2 • This receiver can only play back Dolby Digital, PCM (32kHz–96 kHz), DTS and (VSX-515 model only) WMA9 Pro digital signal
formats. With other digital signal formats, set to
ANALOG
.
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 16) and set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
STANDARD
ADVANCED
SURR
ST/DIRECT
/AUTO SURR
SIGNAL
SELECT
LISTENING MODE
STANDARD
VSB
MODE
ADVANCED
SURROUND
STEREO/
DIRECT
LISTENING MODE
QUICK
SETUP
SPEAKER
IMPEDANCE
TONE
MUTE
SIGNAL
SELECT
TUNER
EDIT
MULTI JOG
PTY
SEARCH
EON
MODE
VSX_415-515.fm 35 ページ ２００５年１月２１日 金曜日 午後５時３分