Pioneer VSX-415-S/-K - Manuale (Pagina 10)

5 minute guide 02
10
En
4 Plug in the receiver and switch it on, followed by your DVD player, subwoofer and TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with
the TV if you don’t know how to do this.
Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input is
selected. If it isn’t, press DVD on the remote control to set the receiver to the DVD input.
5 Press QUICK SETUP on the front panel to specify your speaker setup, room size and listening
position.
Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick Setup
on page 11 if you’re unsure about the settings.
6 Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See Listening to your system on page 31 for
more on this. 1 See also Choosing your receiver setup on page 40 (VSX-415) or The System Setup
menu on page 44 (VSX-515) for more setup options.
Note
1 Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the
listening mode must be set to
STANDARD (it should already be set—see Listening in surround sound on page 31 if you need to
do this) if you want multichannel surround sound.
COAX
COAX
OPT
(TV/SAT)
(DVD /LD)
(CD)
ASSIGNABLE DIGITAL IN
1
1
2
FRONT R L R L CENTER SURROUND R L SURROUND BACK
S I N G L E
S
P
E
A
K
E
R
S
SEE INSTRUCTION MANUAL
AM LOOP
FM UNBAL 75 Ω
IN
IN
IN
MONITOR OUT
SUB WOOFER
SURROUND
CEN- TER
OUT
VIDEO
SUB WOOFER
R AUDIO L
IN
IN
IN
IN
OUT
OUT
IN
CD L R
DVR/ VCR
TV / SAT
DVD /LD
PLAY
CD-R / TAPE / MD
FRONT
PREOUT
REC
ANTENNA
DVD 5.1CH INPUT
D V D 5.1CH INPUT
INPUT
VSX-515
Front speakers
L R C LS RS
Powered subwoofer
SW
Single
surround
back
speaker
Surround speakers
SBL SBR
Surround back speakers Center speaker
VSX_415-515.fm 10 ページ ２００５年１月２１日 金曜日 午後５時３分