Fulgor Milano SBQ 1000 G - Manuale (Pagina 86)

86 87
GB
Note: Make sure the LPG cylinder valve or regulator is closed.
A) Connect the LPG cylinder.
Some regulators are connected by pushing ON and are disconnected by pulling OFF, while
other types of regulators have a nut with left hand thread for connecting to the cylinder valve.
Follow the illustrations in the instructions for the specific connection of the regulator.
a) Screw the regulator to the cylinder by turning it counter-clockwise (1). Install the regulator so
that the vent hole (2) is facing downward.
b) Screw the regulator to the cylinder by turning it counter-clockwise (3).
c) Make sure that the regulator lever (5) is in the lowered or off position.
Press the regulator on the cylinder valve until you hear a click indicating that it is in position (6).
d) Make sure that the regulator lever is in the OFF position. Lift the bezel of the regulator (7).
Press the regulator onto the cylinder valve and hold it
pressed. Lower the bezel (8). If the regulator does not lock, repeat the procedure.
Connection of the LPG cylinder