Fulgor Milano SBQ 1000 G - Manuale (Pagina 77)

76 77
GB
• The appliance requires ventilation openings in the front wall of the compartment. See the
drawing below for the details.
• The appliance unit can be mounted in an island counter or a counter with splash guard.
Read the specific requirements for each type of mounting.
Island-mounted
• If the appliance is installed in an island, it can be placed in the centre. Pay particular
attention to the overall dimensions of the top of the island, taking into account the open
cooking hood and its projection. See page 78.
• The required dimensions of the cut-out are 1025 mm x 502 mm (see drawing).
Installation in a counter in a special context
• The context must be made of non-combustible material.
• When mounting the appliance against a wall or a fence, it is essential to insulate combustible
materials. All combustible materials must be kept at least 600 mm away from the barbecue.
• The minimum depth of the mounting surface (counter) is 600 mm
• The required dimensions of the cut-out are 1025 mm x 505 mm (see drawing).
• Models with high cooking cover require a specific free space on the back of the barbecue
between the splash guard and the cut-out of the counter of at least 70 mm. This, so that the
hood has the free space needed to open.