Videotec DCJ - Manuale (Pagina 245)

Page 113 MNVADCJ01_0543
- setup of the group sequences.
When the key is pressed the display will ask which group number to modify:


.528312PDZJ O!K

Insert the group number to be modified (from 0 to 5)
 
k2+S-<
5283
,029,
5283

Use the joystick to modify or remove the group.
Confirm with  .
R 

k++26S7S21
(9,(1+;S7
When this menu is entered, the group has been erased. Choose the
line “Add position” as many times as necessary to redefine the
sequence of positions for the group. When the sequence is complete
choose “Save and exit”
RR
80),5ZJ O" K
3,,+" JCO" K
PS0, CJ OC #K
Insert the desired position, the scan speed and dwell time in seconds
(when the position is reached).
For “Speed” and “Dwell time”, default values are suggested, but these
can be changed.
6.19.4.3 Tour
A Tour is available, which is defined as a combination of a series of groups. See the dome manual for further
explanation.
 start tour
. end tour
- set up tour
When the key is pressed the display will ask what kind of change to make to the tour:

k2+S-<285
,029,285
Use the joystick to modify or remove the tour.
Confirm with

.
R 
k++
5283
(9,(1+;S7
When this menu is entered, the tour has been erased.
Choose the line “Add group” as many times as necessary to redefine
the sequence of tour groups. When the sequence is complete choose
“Save and exit”



528312PDZ
J O!K
Insert the group to add to the tour sequence.