Videotec DCJ - Manuale (Pagina 224)

Page 92 MNVADCJ01_0543
6.13 Kalatel Cy berDome / CyberScout Dome
6.13.1 Materials a nd reference documents
Kalatel CyberDome and CyberScout Dome installation and operation manual.
Reference manual ASCII protocol 1038010A. January 2003
6.13.2 Connection
6.13.2.1 Cable
White
Yellow
RS485A
RS485B
Rx +
Rx -
6.13.2.2 Setting up th e keyboard
When configuring the keyboard the RRQRO submenu should have the
following settings:
PROP
5272*2UD
(U(7,U
211,*7PD,UPO
(8+5(7,D%"
The baud rate can have three possible values: from 2400 to
9600, make sure it is consistent with that of the dome.
See the corresponding dome handbook to make sure that the dome is in the communication mode using the
ASCII protocol.
6.13.2.3 Selecting th e dome
The dome number should be configured correctly (it will then be recalled using the
55
controls on the keyboard).
6.13.3 Configurati on
Dome setup is carried out for the most part using the On Screen Menu.
Some parameters can be configured by pressing key combinations or by inserting special codes.
For all dome setup operations the keyboard must be enabled for CONFIGURING THE TELEMETRY
(
R
Q RQ R
P menu).
6.13.3.1 OSM Config uration
Connect the dome directly to the keyboard and a monitor to the video OUT on the dome.
-
start dome setup.
The dome will show the on-screen menu, the keyboard display will show the mode change:



6*3,572,;S7