Videotec DCJ - Manuale (Pagina 192)

Page 60 MNVADCJ01_0543
5.18 Sony DVR
5.18.1 Description
The Sony HSR-X216P digital video recorder can be used to connect 16 input videos which are digitalized and
then recorded in digital format.
5.18.2 Materials a nd reference documents
Sony HSR-X216P digital video recorder
Video recorder manual
Security Serial Protocol Ver 1.11.2, issued on November 28, 2002.
5.18.3 Direct conn ection
5.18.3.1 Cable
DCJ RJjack 1 RJjack 2 DVR
RS485A white red RS485A
RS485B yellow green RS485B
The connection is in RS485. The max. distance between keyboard and DVR is 1200 metres.
5.18.3.2 Setting up th e DVR
Configure the unit address and the RS485 communication mode appropriately. See the corresponding user’s
manual.
5.18.3.3 Setting up th e keyboard
When configuring the keyboard, the RRQRR submenu should be set up as follows:
RPRR
<3,D95
5272*2UD21<
(8+5(7,DC%
Sony DVR control
Four baud rate values are possible.
5.18.3.4 Operational test
When the keyboard is connected directly with the multiplexer configured as above, using the cable as shown
above, it should be immediately possible to switch the input videos:
• press ! to select multiplexer unit 1
• press ! , " , to select the input videos.
For each command sent by the keyboard, a corresponding LED lights up on the local multiplexer keyboard.
Important!! If the multiplexer unit number does not match, the commands sent by the keyboard will be
ignored.