Videotec DCJ - Manuale (Pagina 185)

Page 53 MNVADCJ01_0543
5.15.4 Configurati on
The multiplexer is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
The multiplexer should be configured for RS485 type communication, with an appropriate identification address
and baud rate.
5.15.4.1 OSM Config uration
Connect the multiplexer directly to the keyboard and a monitor to the MONITOR 1 output.
- starts multiplexer configuration.
The multiplexer shows the on screen menu; the keyboard display indicates the mode change:

 R
R
6*72,1+
8
/ 9 : increase and decrease the selected value
 start and end of the configuration
 equivalent to the NEXT key

equivalent to the BACK key
 exits the special mode of configuration
Joystick 4 : movement within the menus.
5.15.5 Dedicated F unctions
As well as the normal procedure for selecting input videos, the Sanyo multiplexer is provided with numerous
other functions that are activated by pressing key combinations corresponding to the keys on the multiplexer’s
local keypad.
The

key is used to change the number of the unit responding to the command.
 

control of the master monitor

!
,

"
,

#
,

$

control of one spot monitor


5.15.5.1 Multiplexer f unctions
•
-! multi
•
-" quad
•
-# plus
•
-$ still
•
-% live
•
-& vcr
5.15.5.2 Other functi ons
•

sequence
•

reset alarms