Eppendorf 5430 R Centrifuge - Manuale (Pagina 49)

Operating controls and function
Centrifuge 5430/5430 R
English (EN)
49
6.2.4 Settings
Menu item/meaning Setting Function Display
Display
Select standard display or extended
display of centrifuging parameters. Standard
display If the centrifuge is at rest the target
values are displayed, and during
centrifugation the actual values of run
time, temperature (only 5430 R) and
the g-force (rcf)/speed.
Extended
display In addition to the standard display,
specified values are always shown at
the bottom of the display.
Loudspeaker
Switch loudspeaker on and off.
In the event of error messages, a signal
tone sounds even if the loudspeaker is
switched off. On Switch on loudspeaker.
Off Switch off loudspeaker.
Volume
Adjust the speaker volume using the menu
arrow keys and in 5 stages.
The signal tone for error messages is
always issued at least at medium volume.
Cancel Exit menu item without saving.
Save Save volume just set.
Default Restore default volume.
Date/time
Set date and time.
The system does not switch automatically
between summer and winter time. In the date display, set year (YYYY),
month (MM) and day (DD).
In the time display, set hours (hh) and
minutes (mm). Before setting the clock
time the time format is selected (12 h /
24 h).
Contrast
Adjust the display contrast using the menu
arrow keys and .
Cancel Exit menu item without saving.
Save Save the contrast just set.
Default Restore default contrast.
Language Set menu language (English, Deutsch,
Français or Español) . (see Set menu
language on p. 30).
Standby
Switch standby mode on and off.
If the centrifuge is not used during the set
time period and no continuous cooling
takes place (only 5430 R), it switches to
the standby mode (see p. 41). On Switch on standby mode.
Off Switch off standby mode.
Set time Using the arrow keys, set the time
after which the centrifuge should
automatically change to the standby
mode (1 to 60 min).
Lid release (only 5430) Automatic Lid opens automatically at the end of
centrifuging when the rotor stops.
Manual Lid remains closed at the end of
centrifuging when the rotor stops and
can be opened using the now flashing
key
open.