2 incorrect handling of the centrifuge, Incorrect handling of the centrifuge – Eppendorf 5430 R Centrifuge Manuale d'uso

Pagina 21

Advertising
background image

Safety

Centrifuge 5430/5430 R

English (EN)

21

3.5.2

Incorrect handling of the centrifuge

WARNING! Risk of injury when opening or closing the centrifuge lid.
There is a risk of crushing your fingers when opening or closing the centrifuge lid.
 When opening or closing the centrifuge lid, do not reach between the lid and device or into

the latching mechanism of the lid.

 Always open the centrifuge lid completely to prevent it from falling.

CAUTION! Poor safety due to incorrect accessories and spare parts.
The use of accessories and spare parts other than those recommended by Eppendorf may
impair the safety, functioning and precision of the device. Eppendorf cannot be held liable or
accept any liability for damage resulting from the use of incorrect or non-recommended
accessories and spare parts, or from the improper use of such equipment.
 Only use accessories and original spare parts recommended by Eppendorf.

NOTICE! Damage to device due to spilled liquids.
1.

Switch off the device.

2.

Disconnect the device from the power supply.

3.

Carefully clean the device and the accessories in accordance with the cleaning and
disinfection instructions in the operating manual.

4.

If a different cleaning and disinfecting method is to be used, contact Eppendorf AG to
ensure that the intended method will not damage the device.

NOTICE! Damage to electronic components due to condensation.
Condensate can form in the device after it has been moved from a cool environment to a
warmer environment.
 After installing the device, wait for at least 4 h. Only then connect the device to the mains

power supply.

NOTICE! Damage from knocking against or moving the device during operation.
If the rotor bangs against the rotor chamber wall, it will cause considerable damage to the
device and rotor.
 Do not move or knock against the device during operation.

Advertising
Questo manuale è associato alle seguenti prodotti: