Pecifications general, Transmitter, Receiver – Vertex Standard FT-1000MP User Manual

Page 5

Advertising
background image

Page 3

O

PERATING

M

ANUAL

S

PECIFICATIONS

General

Rx Frequency Range:

100 kHz - 30 MHz

Tx Frequency Ranges:

160 - 10m (Amateur bands only)

Frequency Stability:

±0.5 ppm (after 1 min. @ 25 °C)
±0.25 ppm (after 1 min. @ 25 °C, w/TCXO-6)

Operating Temperature Range:

–10 °C ~ +50 °C

Emission Modes:

LSB, USB, CW, FSK, AFSK, AM, FM

Frequency Steps:

0.625/1.25/2.5/5/10 Hz for SSB,CW, RTTY & Packet;
100 Hz for AM and FM

Antenna Impedance:

50 Ohms, unbalanced
16.6 - 150 Ohms, unbalanced (Tuner ON, TX only)

Power Consumption(@13.8 V DC): Rx (no signal)

2.3 A

Rx (signal)

2.7 A

Tx (100 W)

20 A

Supply Voltage:

13.8 VDC/100-120 VAC 50-60 Hz/200-240 VAC 50-60 Hz

Dimensions (WHD):

410 x 135 x 347 mm ( 16 x 5.3 x 13.7 inch)

Weight (approx.):

15 kg. (33 lbs)

Transmitter

Power Output:

Adjustable up to 100 watts (25 watts AM carrier),
Class A mode (SSB): 25 watts maximum

Duty Cycle:

100% @ 50 watts, 50% @ 100 watts (FM & RTTY, 3-minute Tx)

Modulation Types:

SSB: J3E Balanced, AM: A3E Low-level (early stage),
FM: F3E Variable reactance, AFSK: J1D, J2D Audio frequency shift keying

Maximum FM Deviation:

± 2.5 kHz

FSK Shift Frequencies:

170, 425, and 850 Hz

Packet Shift Frequencies:

200 and 1000 Hz

Harmonic Radiation:

Better than –60 dB (Typical)

SSB Carrier Suppression:

At least 40 dB below peak output

Undesired Sideband Suppression: At least 55 dB below peak output
Audio Response (SSB):

Not more than -6 dB from 400 to 2600 Hz

3rd-order IMD:

–31 dB @ 100 watts PEP, or better
Class A mode: –40 dB @ 25 watts PEP (Typical)

Microphone Impedance:

500 to 600 Ohms

Receiver

Circuit Type:

Quad-conversion superheterodyne (triple conversion for FM)

Intermediate Frequencies:

Main Rx; 70.455 MHz/8.215 MHz/455 kHz, Sub Rx; 47.21 MHz/455 kHz

Sensitivity:

Modes

0.5 - 1.8 MHz

1.8 - 30 MHz

SSB/CW (2.0 kHz)

2 µV

0.16 µV

AM (6 kHz)

13 µV

2 µV

FM

0.5 µV

(with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD,
0 dBµ = 1 µV)

Selectivity (–6/–60 dB):

Band Width

Modes

Minimum –6 dB BW

Maximum –60 dB BW

2.4 kHz

all except FM

2.2 kHz

4.2 kHz

2.0 kHz

all except FM

1.8 kHz

3.6 kHz

500 Hz

CW/RTTY/Packet

500 Hz

1.8 kHz

250 Hz

CW/RTTY/Packet

250 Hz

700 Hz

AM (Wide)

4 kHz

14 kHz

FM

8 kHz

19 kHz

IF Rejection (1.8 ~ 30 MHz):

80 dB or better (Main Rx), 60 dB or better (Sub Rx)

Image Rejection (1.8 ~ 30 MHz):

80 dB or better (Main), 50 dB or better (Sub)

Maximum Audio Output:

2.0 W into 4 Ohms with <10% THD

Audio Output Impedance:

4 to 8 Ohms

Specifications are subject to change, in the interest of technical improvement, without notice or obligation.

Advertising