Vertex Standard FT-1000MP - Manual (Page 35)

Page 33 O
PERATING
M
ANUAL
VR6812
This control adjusts the tuning meter segment in-
dications.
Do not adjust this control, by mistake, as this
control will adversely affect meter tuning indica-
tion, and requires factory re-alignment!.
HPB-M
This control sets the audio level available from the
main receiver to headphone jack B (¼-inch plug).
HPB-S
This control sets the audio level available from the
sub receiver to headphone jack B (¼-inch plug).
HPA-M
This control sets the audio level available from the
main receiver to headphone jack A (3.5 mm plug).
HPA-S
This control sets the audio level available from the
sub receiver to headphone jack A (3.5 mm plug).
Additional Note
The volume of the beep that sounds when a front-
panel button is pushed can be adjusted by turning
a trimmer accessed via the small hole on the bot-
tom cover of the transceiver. Insert a small, thin,
insulated, flat screwdriver into the hole to adjust
VR3001 for the desired beep volume. The Beep
tone frequency is adjusted via menu selection 4-2;
see page 101.