Bird Technologies 8890-400 Series - Manuale (Pagina 25)

Meter
Placement
A standard ten foot (3 meter) cable is supplied with each
wattmeter. It is equipped with a dc connector plug on one
end and lugs on the other. Alternate lengths are available
on request.
1. Connect the the dc cable plug to the jack on the
element socket.
2. Make certain that the connection is tight and
clean to ensure accurate readings.
3. Place the meter in a convenient location, away
from dust and temperature extremes.
Blower
Assembly
The optional BA-310 blower assembly adds forced air cool-
ing capability to the load. When the blower is installed, the
rated capacity of the load is doubled. Mounting instructions
are located in part number 920-BA-300/310 Instruction
Book.
15
Installation