Pioneer VSX-817-K - Manuale (Pagina 44)

Making recordings 08
44
En
Chapter 8:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
1
Keep in mind you can’t make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 10 for more on
connections).
1 Select the source you want to record.
Use the input select buttons ( INPUT
SELECTOR).
2 Select the input signal (if necessary).
Press SIGNAL SELECT (front panel) to select
the input signal corresponding to the source
component (see page 29 for more on this).
3 Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4 Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
2
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.
5 Start recording, then start playback of the
source component.
Note
1 VSX-817 model only – If you are recording a video source, you need to use the same type of connection for the source as for the
recorder. For example, you can’t record a component hooked up to composite video jacks with a recorder hooked up to the com-
ponent video outputs (see Connecting other video components on page 14 for more on video connections).
INPUT SELECTOR
RECEIVER SLEEP DIMMER PHASE
ANALOG ATT
AUTO SURR STANDARD ADV.SURR
STEREO/
F.S.SURR
CD-R F.AUDIO
DVR DVD
USB AM FM CD
RECEIVER TV
SB ch
2 The receiver’s volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
VSX417_817.fm Page 44 Wednesday, December 20, 2006 2:35 PM