Proel FREE10 - Manuale (Pagina 8)

8
1. MIC 1 IN
This is a female combo connector that accepts a XLR or a JACK plug from any dynamic balanced or
unbalanced microphone. The XLR input is wired as follows:
Pin 1 = shield or ground
Pin 2 = + positive or "hot"
Pin 3 = ‐ negative or "cold"
The JACK input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
2. MIC 1 LEVEL
This potentiometer sets the level of the MIC 1 IN input.
3. MIC 2 IN
Same as MIC 1 IN input.
4. MIC 2 LEVEL
This potentiometer sets the level of the MIC 2 IN input.
5. AUX 1 IN
This is a female jack connector that accepts JACK plug from any line level unbalanced source. The JACK
input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
6. AUX 1 LEVEL
This potentiometer sets the level of the AUX 1 IN input.
7. AUX 2 IN (RCA)
These are two RCA female connectors that accept two RCA plug from LEFT and RIGHT channels of a line
level auxiliary source, or a MINI JACK (3.5mm) female connector that accepts a STEREO MINI JACK plug
from Computer/CD/DVD/MP3 players.
Each RCA input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
The MINI JACK is wired as follows:
Tip = positive signal of left channel
Ring = positive signal of right channel
Sleeve = shield or ground
8. AUX 2 LEVEL
This potentiometer sets the level of the AUX 2 IN input.
9. MP3/DISC LEVEL
This potentiometer sets the level of the internal CD/DVD/MP3 player. NOTE: this potentiometer also
switches ON/OFF the MP3/DISC player (if the player remains unused this feature prevents the discharge
of the internal battery).
10. ECHO
This potentiometer sets the level of the echo effect applied to the MIC IN inputs and to the WIRELESS
MIC.
11. HIGH
This potentiometer sets the HIGH TONE level: if rotated clockwise it enhances the highs, if rotated
counter‐clockwise it reduces the highs (in the centre position it’s flat).