Proel FREE10 - Manuale (Pagina 18)

REMOTE CONTROL BATTERY REPLACEMENT
To use the remote control for the first time you need to remove the adhesive sticker
as show in figure. When the battery of the remote control is discharged, you need
to replace it with a new one of the same type. Instructions about how to open the
battery compartment are printed on the remote control body.
BE CAREFUL: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH SAME TYPE: CR 2025 LITHIUM MANGANESE DIOXIDE BATTERY.
The battery contains Perchlorate Material – special handling may apply, it should not be disposed
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it.
VRLA BATTERY OPERATIONS AND REPLACEMENT
Execute the following instructions to replace the internal sealed VRLA battery:
1. Remove the front cover unscrewing the two 5mm hex socket screws.
2. Remove the battery lock bar unscrewing the PH2 screw indicated in the picture.
3. Take out the batteries from the box.
4. Disconnect the battery terminals, avoiding carefully any shorts between them. Replace the
batteries with two new one with same size and characteristics.
5. Fix the batteries and close the cover.
18