AJA UDC - Manuale (Pagina 9)

1
9 AJA Up/Down/Cross Mini-Converter
Colored text beside the connectors indicates signal type and what the UDC is doing.
Text in blue shows the values automatically selected, while text in black shows values
that have been manually selected. Text in red shows that the UDC is not detecting a
signal or cannot negotiate with the attached device (even if can’t detect an output
device, it still shows the signal it is outputting).
Note: Configuration settings in red will change based on the attached output device
as well as input signals. For improved accuracy and reliability, you should configure the
Mini-Converter only when the target output device is attached and input signals are
supplied at the inputs.
Screens are virtually the same on both PC and Mac, with subtle differences that reflect
the general look of the platform environment.
Mini Config can manage multiple AJA Mini-Converters connected via USB—even when
they are of differing types. However it only connects to one at a time. You can choose
which Mini-Converter you wish to control using the pull-down menu in the upper right
hand corner.
If you want to configure and update multiple Mini-Converters in parallel, you can do it
by running multiple instances of the Mini Config application and have each control a
different Mini-Converter.
The name of each Mini-Converter found can be seen in the menu pull-down showing
the port number and converter name at the top right hand side of the screen. This
allows you to select a desired Mini-Converter when there are more than one. Selecting
a Mini-Converter with this pull-down menu causes this application to connect to the
selected converter. The type of Mini-Converter and serial number will be shown in the
graphic and text below it.
A status field at the bottom of the screen shows whether you are connected and
communicating with the Mini-Converter shown using Mini-Config.
When configuring the UDC Mini-Converter, select it from the top pull-down, view the
current settings and change any values. Making a change communicates that new
value to the Mini-Converter’s non-volatile memory.
Tabbed Screens The Tabs delineate groups of controls for each type of task to be performed.
Mini Config, Tabbed Screens
Click on any of the tabbed buttons (Video/Audio/Update/Info) and the screen below
will change to match. Each of these screens are described on the following pages.
Tabbed screens