AJA UDC - Manuale (Pagina 13)

1
13 AJA Up/Down/Cross Mini-Converter
RGB Range: Selects the HDMI video levels when the Color Space is RGB 8Bit or RGB 10Bit.
Auto: The UDC automatically selects the mode based on getting the attached
HDMI device's EDID information. This is the recommended setting. The selected
mode is shown to the right of the popup control.
SMPTE: The UDC scales the output video level to 8-bit range 16 - 235 (10-bit 64 -
940) regardless of the attached device's EDID.
Full Range: The UDC scales the output video level to 8-bit range 0 - 255 (10-bit 0
- 1023) regardless of the attached device's EDID.
Audio Tab Screen The Audio Screen is where you can configure UDC HDMI and analog (RCA-style) audio
output channels. Pull down menu settings are described following the screen graphic.
There is no DIP switch equivalent for these controls. The setting is saved in nonvolatile
memory in the module and used for all subsequent operation.
Mini Config, Audio Screen
SDI Output (Embedded) Audio: The output audio is a channel-for-channel copy of the
input SDI embedded audio. There are no user controls.
HDMI Audio: Selects how many SDI channels are passed to the HDMI connector and
which channel pairs are selected. These are the choices:
Auto: The UDC automatically selects the audio output configuration based on
communicating with the attached HDMI device. The resulting mode is displayed
to the right of the popup control.
2 Channel: Outputs a pair of channels from the SDI stream to two channels on
the HDMI output connector. The selected audio pair is determined by the Analog
Audio setting (below).
8 Channel: Outputs SDI channels 1 through 8 to the HDMI output connector.
Analog Audio: Selects the channel pair that will be output to the Analog RCA
connectors (L/R) and the HDMI audio output (when HDMI Audio is in 2-channel mode).
These are the choices:
Channel 1+2, Channel 3+4, Channel 5+6, Channel 7+8, Channel 9+10,
Channel 11+12, Channel 13+14, Channel 15+16