AJA UDC - Manuale (Pagina 7)

1
7 AJA Up/Down/Cross Mini-Converter
Using Mini Config for Configuration and Viewing of Settings
The AJA Mini Config application, which displays a graphical view of the module's input/
output status, offers more complete control of the UDC than is possible using the DIP
switches. Versions of the Mini Config application are available to run on both Windows
and Macintosh host platforms. Mini Config automatically scans the USB bus for
connections to AJA modules and configures itself for the type of product discovered.
The following describes Mini Config operation when connected to a UDC module.
Installing Mini
Config on a Mac To install the application on a Mac, simply insert the CD supplied with
the Mini-Converter into the computer, and drag the “AJA Mini Config”
application for your platform (Mac or PC) to your desktop or an
applications folder.
Note: Macintosh computers must be Intel-based (G5, G4 and earlier
models will not work with Mini Config.
Installing Mini
Config on a PC To install the application on
a Windows PC, insert the CD
supplied with the Mini-
Converter into the
computer, locate the
“MiniInstaller” application,
and then double-click it.
A Setup Wizard will guide
you through the installation.
Just click Next to begin.
Answer all questions in the
subsequent dialogs; when
you’re done, you will be able to locate the Mini Config application in the AJA folder in
the Programs listing.
Running Mini
Config Connect a UDC Mini-Converter to the PC or Mac via the supplied USB cable. Connect
power to the Mini-Converter (DWP or DWP-U recommended).
Note: On a Mac, when the
Mini-Converter is connected
to the USB port, you may see
an alert like the one shown
here. If you do, press Cancel—
this alert can be ignored.